If Peter Brock could get an A30 going faster (well quite a bit faster) between 1967 & 1970, I'm sure we can do similar if not better in 2017. I quite like the saying "there's no substitute for cubic inches"Hurtzberg wrote:I would like a faster A35.
BMW k1200rs or other bike engines
Re: BMW k1200rs or other bike engines
-
- Posts: 5896
- Joined: Mon Apr 21, 2008 1:00 pm
- Location: High Wycombe, Bucks
Re: BMW k1200rs or other bike engines
Measuring the engine and box in my car is more difficult because of the supercharger installation but there will,definitely be no height problem, as Steven says.
The gearbox is quite compact so it is unlikely to need much in the way of trans tunnel mods other than the hole for the gear lever.Certainly no more than for a Type 9.
It will be necessary to do quite a bit of hacking to allow for the engines width, allowing for manifolds, especially the induction side.
The weight penalty may be significant, but , with suitable suspension mods it need not be a big problem on a road going car -racing is different - in many ways.
MX5 and RX8 boxes have the same bell housing arrangement and I strongly suspect that they are very similar in other ways, perhaps even identical, at least dimensionally. Ratios might be another matter.
The gearbox is quite compact so it is unlikely to need much in the way of trans tunnel mods other than the hole for the gear lever.Certainly no more than for a Type 9.
It will be necessary to do quite a bit of hacking to allow for the engines width, allowing for manifolds, especially the induction side.
The weight penalty may be significant, but , with suitable suspension mods it need not be a big problem on a road going car -racing is different - in many ways.
MX5 and RX8 boxes have the same bell housing arrangement and I strongly suspect that they are very similar in other ways, perhaps even identical, at least dimensionally. Ratios might be another matter.
Re: BMW k1200rs or other bike engines
Never has a truer word been spoken...Duncan wrote:I quite like the saying "there's no substitute for cubic inches"
Re: BMW k1200rs or other bike engines
On a fast road car, good dynamics are still very important. That's why manufacturers such Lotus, Aston Martin and even Mazda (with MX5) strive for balanced weight distribution. A35 has intrinsic disadvantage of engine position spanning front axle centre-line (unlike MG Midget which is behind). Making matters worse by installing an even heavier engine is not a good idea.Dave Clark wrote:The weight penalty may be significant, but , with suitable suspension mods it need not be a big problem on a road going car -racing is different - in many ways.
- Hoppend
- Posts: 415
- Joined: Wed Oct 28, 2009 9:48 pm
- Location: Near Amsterdam, the Netherlands
- Contact:
Re: BMW k1200rs or other bike engines
On a side note, all this talk about engine and hacking to make a bigger one fit. Did you see the latest Furze video:
https://youtu.be/tEQopnaHipo
https://youtu.be/tEQopnaHipo
My Austin A30-A35 website: http://www.hoppend.nl
Chairman/webmaster of Dutch Owners club http://www.austinclub.nl
Chairman/webmaster of Dutch Owners club http://www.austinclub.nl
Re: BMW k1200rs or other bike engines
I love the projects that Colin Furze does.
From what I've read, A series engine weighs ~ 245 lbs. Mx5 engine weighs ~ 265lbs is that a big enough difference to care about?
Mx5 gearbox - It was my understanding that the mk1 and mk2 gearboxes are very different to the mk3 gearbox.
In the mk3, the engine is closely related to the Duratec. The width of the bellhousing is a fair bit wider than the mk1 and 2. The gearbox from an RX8 bolts straight onto duratec too, I believe (But check before buying one!!)
So in a A35, the mk1 or 2 gearbox would fit much easier as Dave said. I have a vague memory that Dave's is a mk2.
From what I've read, A series engine weighs ~ 245 lbs. Mx5 engine weighs ~ 265lbs is that a big enough difference to care about?
Mx5 gearbox - It was my understanding that the mk1 and mk2 gearboxes are very different to the mk3 gearbox.
In the mk3, the engine is closely related to the Duratec. The width of the bellhousing is a fair bit wider than the mk1 and 2. The gearbox from an RX8 bolts straight onto duratec too, I believe (But check before buying one!!)
So in a A35, the mk1 or 2 gearbox would fit much easier as Dave said. I have a vague memory that Dave's is a mk2.
Andrew
1957 A35
1957 A35
- Countryboy
- Posts: 4377
- Joined: Fri Nov 12, 2010 11:45 pm
- Location: Leafy North Hampshire
Re: BMW k1200rs or other bike engines
That looked like a perfectly good motor cycle / carpetHoppend wrote:On a side note, all this talk about engine and hacking to make a bigger one fit. Did you see the latest Furze video:
https://youtu.be/tEQopnaHipo
I feel for this guys neighbours !
Rest Home for rusty vehicles
Re: BMW k1200rs or other bike engines
Amazingly talented guy...Hurtzberg wrote:I love the projects that Colin Furze does.
Yes because you are making an existing problem worse, but you could get away with it. Illustrates just how heavy an A-series really is...Hurtzberg wrote:From what I've read, A series engine weighs ~ 245 lbs. Mx5 engine weighs ~ 265lbs is that a big enough difference to care about?
Be careful with quoted engine weights - it's a minefield because ancillaries can be included or omitted. Just found a figure for Duratec 2.0L of 92.8kg* but that's without clutch or alternator. Duratec 2.3L will not be much heavier.
* 92.8kg = 205lb which is 40lb lighter than an A-series (ref Hurtzberg) at 2.0L capacity...
Re: BMW k1200rs or other bike engines
Countryboy wrote:I feel for this guys neighbours !
Click here to learn how to add YouTube Videos to your phpBB forum
Click here to learn how to add YouTube Videos to your phpBB forum
Re: BMW k1200rs or other bike engines
The trilogy...Hoppend wrote:On a side note, all this talk about engine and hacking to make a bigger one fit. Did you see the latest Furze video: https://youtu.be/tEQopnaHipo
Click here to learn how to add YouTube Videos to your phpBB forum
Click here to learn how to add YouTube Videos to your phpBB forum
Click here to learn how to add YouTube Videos to your phpBB forum
- Hoppend
- Posts: 415
- Joined: Wed Oct 28, 2009 9:48 pm
- Location: Near Amsterdam, the Netherlands
- Contact:
Re: BMW k1200rs or other bike engines
Would have thought that it would go a bit faster... mind you, I would be terrified at that speed in a dodgem.
My Austin A30-A35 website: http://www.hoppend.nl
Chairman/webmaster of Dutch Owners club http://www.austinclub.nl
Chairman/webmaster of Dutch Owners club http://www.austinclub.nl
Re: BMW k1200rs or other bike engines
I thought 107 mph (not km/h) was fairly impressive for a dodgem...Hoppend wrote:Would have thought that it would go a bit faster...
-
- Posts: 5896
- Joined: Mon Apr 21, 2008 1:00 pm
- Location: High Wycombe, Bucks
Re: BMW k1200rs or other bike engines
And a pretty impressive speed in shirt sleeves too !
Re: BMW k1200rs or other bike engines
And without a crash helmet Hope Colin Furze doesn't come to a sticky end...
- Hoppend
- Posts: 415
- Joined: Wed Oct 28, 2009 9:48 pm
- Location: Near Amsterdam, the Netherlands
- Contact:
BMW k1200rs or other bike engines
I did the actual conversion just now... faster than I thought it was... oops
My Austin A30-A35 website: http://www.hoppend.nl
Chairman/webmaster of Dutch Owners club http://www.austinclub.nl
Chairman/webmaster of Dutch Owners club http://www.austinclub.nl