Retainers for head light to chrome dolding ring

Technical questions and Maintenance advice post in here please
Post Reply
hodge2
Posts: 459
Joined: Sun Nov 04, 2012 2:59 pm
Location: Keighley

Retainers for head light to chrome dolding ring

Post by hodge2 »

Hi guys thanks,to all the guys who told me what to try van not starting
just head lights to adjust before it goes back toM.O.T. Tester for Cert


Question
Where can I get the retainers to fix headlight to chrome fitting that holds the headlight in. Before
It is fixed to the headlight bowl

hodge2

A11989 Mem no
User avatar
gazza82
Site Admin
Posts: 5585
Joined: Sun Nov 24, 2013 3:39 pm
Committee Role: WebEditor
Location: Buckinghamshire
x 2
x 17
Contact:

Re: Retainers for head light to chrome dolding ring

Post by gazza82 »

hodge2 wrote:Hi guys thanks,to all the guys who told me what to try van not starting
just head lights to adjust before it goes back toM.O.T. Tester for Cert


Question
Where can I get the retainers to fix headlight to chrome fitting that holds the headlight in. Before
It is fixed to the headlight bowl

hodge2

A11989 Mem no
Which parts are we talking about here Richard?

Picture below is from Midget parts list but are similar.
headlights_midget.jpg
headlights_midget.jpg (80.99 KiB) Viewed 197 times
"If you're driving on the edge ... you're leaving too much room!"

Club WebEditor.

Cars: "Project 757" '59 A35 2-door bought in 1971 & Subaru BRZ SE LUX Auto plus "family fleet": Alfa MiTo, Peugeot 206, (Ex '98 Alfa Romeo 156 2.0 TS)
hodge2
Posts: 459
Joined: Sun Nov 04, 2012 2:59 pm
Location: Keighley

Re: Retainers for head light to chrome dolding ring

Post by hodge2 »

Hi Gazzac

My head lights n ew bowl is fit but your diagrams show to many parts I only have a chrome metal circular
Fitting which holds the head light and then fits into new bowlwhere slots are to fit at the adjusting screws

I do t want to b e buying a new set as it wasn't nessecary with left hand light it just had small metal. Pieces with a screw hole .

I aprecaite you help
hodge2
hodge2
Posts: 459
Joined: Sun Nov 04, 2012 2:59 pm
Location: Keighley

Re: Retainers for head light to chrome dolding ring

Post by hodge2 »

Hi Gazza thank s fo r trying to helpsorted by making simularmetah bits


hodge2
Post Reply